Sanitary Negative Pressure Pump Manufacturer

• Customization: Available
• Certification: CE
• Installation Method: Horizontal
• Model NO.: YUY-F
• Power: Electric
• Material: Stainless Steel
• Working Fluid: Water
• Performance: No Leak
• Applications: Petrochemical
• Motor: ABB Motor
• Transport Package: Woodencase
• Specification: CE, GMP
• Trademark: YUY
• Origin: China
• HS Code: 8414100090
• Production Capacity: 5000

Product Description

Specifications :
1)Application:Belong to a turbine the diversion centrifugal pump can 
extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .
 
2)Spec:3T-180T,0.75KW-75KW
Material:SUS304   SUS316L 
the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304
Standard:DIN, SMS
Impeller:Open type impeller ,semi-close type impeller 
Surface treatment:The parts contacted with medium is polished
Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,
and has a amount of suction .
The max pressure of inlet:0.5MPa
Temperature range:-10°C to +140°C(EPDM)
washable mechanical sealing:
water pressure:Max 0.1MPa 
3)Motor:
1. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements
2. The explosion-proof motor also available ,that can meet with the requirement of different applications .
3.It with excellent electric performance ,and with low noise,low vibration,
the protection grade is IP55,insulation grade is F.
4 .Operate in voltage:
      ≤3Kw,220-240V/380-420V,/Y
      ≥3Kw,380-420V/660-690V, /Y
5.frequency:50Hz/60Hz
6. working method:continuous(SI)
7.rotate speed:the standard rotate speed is 2900r/min
4)Instruction of the YUY sanitary negative pressure pump 
For example:
YUY-F- B-2.2- 10- 24- M

Technical Parameters
Flow Medium Parts	AISI304/AISI316L(1.4301/1.4404)
Without Flow Medium Parts	AISI304(1.4301)
Outside Surface	Semi bright
Inside Surface	Polished Ra0.4
Product Wetted Seals	EPDM,Silicone,FPM.NBR
Max.Inlet  Pressure	0.5MPA
Temperature Range	-10ºC~140ºC
Noise Level(At 1m)	60-80dB(A)
Capacity	1.5~200ton/hour
Motor	ABB Motor and China motor, Siemens
Voltage	220V,380V,440V,480V,etc
Impeller Type	Closed Impeller, Open Impeller, Semi-Open Type Impeller
Connection ends	Tri clover, butt weld, threaded, union and flange
Mechanical seal(standard)	plumbago&silicon carbide

 

Specification:	3T-180T, 6m-60m, 0.55KW-75KW
Material:	SS304 SS316L (The pump body, pump cover and impeller)
Impeller:	1.Open type impeller, there is no blind corner;2Close type impeller;3. Semi-open type impeller
Operate condition:	Sanitary centrifugal pump is close to HORIZONTAL transport of high and low level, is not the Self-priming type.
Surface treatment:	The part contact with medium is Polished,  And another part is Sand Blasted
Max inlet pressure	0.5MPa
Temperature range:	-10 to Degree +140 Degree
Flushable mechanical sealing:	Water pressure: __Max 0.1MPa Water lift: ___0.25-0.5L/min
Standards:	DIN \ SMS

Certifications

 

Workshop and Warehouse